As you can see from previous posts, I’ve started automating my house. There was an ADT alarm system installed. I was given a user code, but that was it. I opted not to pay ADT’s ridiculous monthly fee since reasonable monitoring can be had for $10/month.

Dec 12, 2018. The programming in an Ademco Vista or Safewatch Pro 2000 or 3000. Note: Default Installer Code is '4112', but if you changed the code,. ADT Installer Code for Alarm Sensor Addition? Question (self.homedefense) submitted 1 year ago. ADT's default installer code is 6321 unless your system was installed by an authorized dealer which they could have used any code they wanted.

Looking at the panel, I have a Safewatch Pro 3000, which the internets tells me is close to a honeywell/ademco vista20p without a couple features like zone doubling. I have a simple touchpad, not an alpha display, probably similar to the 6150, so it’s terrible to program with. The wireless receiver is in the 5881 series, still don’t know for sure the specific model, but I suspect its the 5881enh. Looking at the OpenHAB wiki, there’s only a couple options for alarm integration, and alarmdecoder seems to be the thing to use for honeywell/ademco panels Looking at the alarmdecoder supported panels FAQ page, the Safewatch Pro 3000 is specifically listed! So I bought an alarmddecoder AD2USB to interface with the alarm.

I have to say their shipping is pretty reasonable. I had it within a week. The quickstart guide that comes with it is helpful enough to get it connected The Getting Started wiki page is also really helpful The installation video really helps to clear up any questions about installing it Of course life happens and it was almost another week before I had time to try connecting it. I’m going to pick another service for monitoring later, so the ADT communications programming isn’t useful to me. If you’re still using ADT for monitoring, definitely put your account in test mode before monkeying with anything, According to the Safewatch Pro 3000 manual, you can get into programming without the installer code by pressing both the * and # keys within 50 seconds of startup. I pulled the battery connection from my alarm, tripped the GFCI outlet the transformer was plugged into, then powered back up, and pressed both buttons. Abhi abhi toh mile the phir kahan jaoge kya thi meri khata tum saza ho gaya download mp3 songs. Instantly in programming mode!

First order of business, setting a new installer code. This will allow me to get back into programming mode without cutting power. The installer code field is *20. Assuming I want to use the code 1234 as my installer code, the sequence is *201234 If you don’t want to change the installer code, but just read out the installer code, read field is #20. The whole point of this was to enable another touchpad on address 18.

That’s data field *191, I only have one partition configured, and I don’t want it to suppress the beeps. The key sequence is *19110. Advertisement: Done programming, *99 is the command to exit (without locking out programming mode) Following the quick start guide, I powered down the panel, disconnected the battery, and connected the alarmdecoder Powering back up, I connected the battery and reconnected the transformer. On my windows laptop, I used the alarmdecoder keypad program.